Product Ranges -

Colourfan Supply units are the versatile solution for a wide range of applications. With energy efficient, ErP compliant fans and robust case construdtion, the low profile units are suitable for ceiling voids, plantrooms and roofs and can be configured for top or bottom access. the perfect complement to Colourfan Extract Units.

Features

• Rigid single skin galvanised sheet steel for sizes 0-6. Aluminium tubular frame and galvanised double skinned panels with mineral wool slab infill for sizes 7-9.
• Grade G4 or G7 high efficiency synthetic pleated filters as standard options 
• Filter airflow pressure switch fitted 
• Dual access panels fitted with quick release catches to enable easy maintenance to individual components 
• Built in LPHW or EHB options 
• LPHW units have a fitted coil connection cover 
• EHB units have a fitted thermal cut out, airflow pressure switch 
• Optional shut off damper with 230 V or 24 V open / close damper motor available

Controls

• Pre-wired to controls when /CP or /CPSC configuration is ordered
• Fitted and pre-wired isolator when /I or /ISC configuration is ordered
• An optional speed controller can be supplied giving a choice of manual, or automatic control from a variety of sources, including BMS, Air Quality Sensor or PIR sensor

Low duty, high efficiency plate heat exchanger unit.

• Duty 0-1m³/sec.
• Cased plate heat exchangers.
• 50-70% heat recovery depending on conditions.
• Case manufactured from galvanised sheet steel with thermal lining.
• Condensate drain pan to exhaust with 3/4" BSP connection.
• Round spigots complete with 'safe fit' rubber gasket for easy ductwork connection.
• Units can be hung or secured to a base.
• Easy to install in ventilation systems.
• Can be used in conjunction with many VES products.

High duty, high efficiency plate heat exchanger unit.

• Duty 0-2.0m³/sec.
• Cased plate heat exchanger.
• 50-70% heat recovery depending on conditions.
• Case manufactured from galvanised sheet steel with thermal lining.
• Rectangular spigots with 20mm mez flange connections.
• Easy to install in ventilation systems.
• Can be used in conjunction with many VES products.

Ecovent - High efficiency heat recovery air handling units.

• Duties up to 2.5m³/s.
• Low energy / high efficiency fans.
• Low SFPs to achieve L2 Building Regulations.
• Wide range of models for ceiling void, plantroom and external locations.
• High efficiency plate heat exchanger and modulating face and bypass damper to control heating / cooling recovery.
• Variety of control options to suit unit requirements.
• Quick change plug connections for easy electrical maintenance.
• Multi access plantroom units with top, bottom, left or right access.
• Inbuilt intelligent controls technology for performance and efficiency.
• Automatic air volume commissioning.
• Integrated energy meter for actual consumption and savings.
• Conditional based servicing, calculating the efficient optimal filter change point.

Find out more about Ecovent Heat Recovery

Ecovent Twin - High efficiency twin extract heat recovery air handling units.

• Duties up to 1.5m³/s.    
• Low energy / high efficiency fans. 
• Twin extract fans to utilise heat recovery technology in sensitive continuous extract systems.        
• Low SFPs to achieve L2 Building Regulations.    
• Wide range of models for ceiling void, plantroom and external locations.     
• High efficiency plate heat exchanger and modulating face and bypass damper to control heating / cooling recovery.
• Variety of control options to suit unit requirements.        
• Quick change plug connections for easy electrical maintenance.         
• Multi access plantroom units with top, bottom, left or right access.        
• Inbuilt intelligent controls technology for performance and efficiency. 
• Automatic air volume commissioning. 
• Conditional based servicing, calculating the efficient optimal filter change point.

Find out more about Ecovent Heat Recovery

VES’ new Ecovent Acoustic heat recovery unit ideal for noise sensitive applications.

• Low noise to meet acoustic requirements, including BB93.
• Independent acoustic testing to BS EN ISO 3744:2010.
• Up to 75% heat recovery efficiency and modulating damper to control heating / cooling recovery.
• Duties up to 0.45 m³/s.
• High efficiency fans with low SFPs to achieve L2 Building Regulations.
• Inbuilt BlueSense intelligent controls technology for performance and efficiency.
• Variety of options to suit unit requirements.
• Quick change plug connections for easy electrical maintenance.
• Multi access plantroom units with top, bottom, left or right access.
• Automatic air volume commissioning.
• Conditional based servicing, calculating the efficient optimal filter change point.

Find out more about Ecovent Heat Recovery

Max bespoke air handling units A & C can meet customer's precise requirements and provide a low cost and energy efficient solution. Flat pack options can also be provided for difficult site conditions.

• Suitable for many applications.
• Unlimited range of duties.
• High efficiency heat recovery.
• 25mm double skinned case construction.
• Low energy / high efficiency fans.
• Specific Fan Power to achieve L2 Building Regulations.
• High quality plantroom or weatherproof units available.
• Flatpacked or sectional.
• Optional EC Fans with integral control.
• Cross flow heat exchanger with optional controls and heating types.

Max bespoke air handling units B & D can meet customer's precise requirements and provide a low cost and energy efficient solution. Flat pack options can also be provided for difficult site conditions.

• Suitable for many applications.
• Unlimited range of duties.
• High efficiency heat recovery.
• 50mm double skinned case construction.
• Low energy / high efficiency fans.
• Specific Fan Power to achieve L2 Building Regulations.
• High quality plantroom or weatherproof units available.
• Flatpacked or sectional.
• Optional EC Fans with integral control.
• Cross flow heat exchanger with optional controls and heating types.