Product Ranges -
| GO TO: |
|
| EURO |
Small duct fan |
| FALA |
Shower and bathroom extract fan |
| POLO |
Bathroom and toilet extract fan |
| TURBO |
In-line duct fans |
EURO
In-line duct fans for domestic applications including bathrooms, toilets, utility rooms, and air extract from bedrooms, cellars etc.
- Ideal for location in ceiling void or roof space.
- Available in two sizes - 100 and 150mm.
- Can be connected to the lighting circuit with a run on timer, or for use with a PIR switch.
- Buy EURO with an installation kit to suit your project.
- These fans meet the Building Regulations requirement of 15 l/sec airflow for these bathrooms and WC's.
- EURO 150 has a particularly low specific fan power at 0.33 watts/litre/second.
<< Back to top
FALA
For domestic showers, bathrooms and toilets.
- The FALA 100 has an attractive wave design in a white housing, and has a power on neon light.
- The fan is supplied with a 230V to 12V transformer, which is to be located away from the wet area and out of reach of the person using the bath or shower.
- Switching can be from light circuit with run on timer or PIR switch.
- Suitable for wall mounting only.
- These fans meet the Building Regulations requirement on 15 l/sec airflow for bathrooms and WC's.
<< Back to top
POLO
This versatile range of fans comes with multiple options. Suitable for bathrooms and toilets.
- Suitable for domestic use and commercial applications such as hotel bathrooms and office toilets.
- Can be installed at any angle in wall or ceiling.
- These fans meet the Building Regulations requirements of 15 L/s intermittent operation (Part F) airflow for bathrooms and WC's.
- All units have a neon running light.
<< Back to top
TURBO
In-line duct fan for domestic applications including bathrooms, toilets, utility rooms, and air extract from bedrooms, cellars etc to improve ventilation.
- The TURBO 100 has a two speed motor setting (fixed at installation) - ideal for use in a roof space or ceiling void.
- TURBO 100 has an integral mounting bracket and quick release clips for motor removal, and can be connected into the lighting circuit with a run on timer, or for use with a PIR switch.
- An installation kit is available with 3 metres of flexible ducting, four fixing straps, ceiling valve and wall cowl or louvre.
- An LD 100 Silencer should be used for very quiet environments.
<< Back to top
<< Back to Product Categories