Discontinued Products

Product ranges -

GO TO:  
Airline Airline supply units complete with circular spigots
Airline Airline extract unit complete with circular spigots
Breeze Extract Unit Wall mounted fan units
Centrette Roof units with centrifugal fan
Centrifume - CFD Kitchen extract fans
Centrifume - CFR Kitchen extract fans
Cubic Condensing Units Designed to match your unit
Ecovent NRG 0, 1 and 2 Heat recovery air handling units
Ecovent NRG 3, 4, 5 and 6 Heat recovery air handling units
Ecovent NRG 7, 8 and 9 Heat recovery air handling unit
Ecovent NRGP 0, 1 and 2 Heat recovery air handling units
Ecovent Plus Ecovent Plus heat recovery air handling units.
FLO2 Twin fan extract units.
Limpet Ceiling extract fan
MYFLO Myflo mixed flow duct mounting centrifugal fan units
REX Rectangular extract unit
SAM Small air handling units
Sensaire Sensaire low energy units with intelligent controls.
Skyline Low silhouette roof extract units
Tex Twin Fans Direct Drive, Belt Drive, Plantroom and Weatherproof
T-Line 90 High temperature kitchen extract unit
Twinimum Twin fan extract units
Vecon DX Condensing Units
Weathermaster Extract Weatherproof extract fan unit complete with cowl outlet
Weathermaster Supply Weatherproof supply unit
Workhorse Fans for tough environments

 

Airline

This is a discontinued product, superseded by Colourfan Supply and Colourfan Extract

Airline supply unit for internal use with G3 panel filter and direct drive centrifugal fan.

  • Electric and hot water heater options
  • 147 mm circular spigots
  • Acoustically lined case
  • Top or bottom access
  • Mounting feet and AV mounts supplied

Airline

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Airline

This is a discontinued product, superseded by Colourfan Extract

Airline unit for internal use with direct drive centrifugal fan.

  • 147 mm circular spigots
  • Optional G3 panel filter (priced separately)
  • Acoustically lined case
  • Top or bottom access
  • Mounting feet and AV mounts supplied

Airline

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Breeze Extract Unit

This is a discontinued product.

Wall mounted extract fan with external wall louvre, through the wall case and direct drive centrifugal fan.


  • Unit has 25 mm inlet flange
  • Acoustically lined single skin case
  • External powder coat paint finish – light grey
  • Loose angle surround for wall fixing

Breeze Extract Unit

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Centrette

This is a discontinued product. The extract unit is superseded by the Dome unit.

Roof extract and supply units with direct drive centrifugal fan

  • Low silhouette roof supply unit with direct drive centrifugal fan, GRP cowl. The fan is mounted in a galvanised case fixed below the cowl frame
  • Low silhouette roof extract unit with axial plate fan and GRP cowl
  • Curb base suitable for external mounting
  • Colour BS00A05
  • Motor side guard
  • Fitted bird screen
  • Suitable for up to 70 °C

Centrette

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Centrifume - CFD

This is a discontinued product.

The kitchen extract fan range

  • Duct mounted with backward curved impellor range
  • Duty range up to 8 m3/s
  • Operating temperature up to 90 oC with motor out of airstream
  • Weatherproof and acoustic enclosures available

Centrifume - CFD

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Centrifume - CFR

This is a discontinued product.

The kitchen extract fan range


  • Roof mounted with vertical jet outlet range
  • Duty range up to 8 m3/s
  • Operating temperature up to 190 o C with motor out of airstream
  • Weatherproof and acoustic enclosures available

Centrifume - CFR

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Cubic Condensing Units

This is a discontinued product.

Designed to match your unit.

Features

  • Cooling only
  • Heat pump
  • Duty range 2.6-161 kW
  • High specification

View Product Leaflet PDF

 
<< Back to top

Ecovent NRG 0, 1 and 2

This is a discontinued product, superseded by Ecovent EVX and Ecovent EAX

Heat recovery air handling units.

  • 0 range has air volume up to 0.125 m3/s
  • 1 and 2 range has air volume up to 0.325 m3/s
  • Shallow design for ceiling void or roof space
  • High efficiency cross flow heat exchanger
  • Top or bottom access
  • Fitted fan control and isolator
  • Circular spigot connections
  • 1 and 2 range has bypass damper to heat exchanger, optional fitted controls package and weatherproof construction available

Ecovent NRG 0, 1 and 2

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Ecovent NRG 3, 4, 5 and 6

This is a discontinued product, superseded by Ecovent EVX and Ecovent EAX

Heat recovery air handling units.

  • 25 mm double skinned cases, available plantroom or weatherproof, flat or stacked configuration. All units built with an aluminium tubular frame, and galvanised steel sheet panels, with resin bonded mineral wool slab infill
  • External units supplied with sloping roof, channel base, inlet and exhaust cowls and powder coat finished in Signal Grey to RAL 7004
  • Low energy backward curved single inlet fans, with low SFP, available with 230 volt single and 400 volt three phase motors
  • Cross flow plate heat exchanger with fitted face and bypass damper and 230 volt actuator
  • Optional fitted controls, pre-wired to all internal components
  • Built in LPHW coil or EHB
  • Fans and bypass damper motor fitted with quick change plug connectors for easy maintenance
  • Flat units have top or bottom access
  • Stacked units have side access
  • Units supplied in two sections

Ecovent NRG 3, 4, 5 and 6

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Ecovent NRG 7, 8 and 9

This is a discontinued product, superseded by Ecovent EVX and Ecovent EAX

Heat recovery air handling unit.

  • 50 mm double skinned case certified to EN 1886 standard
  • Direct drive centrifugal plug fans complete with prewired inverter for energy saving, and rapid site commissioning. The fan is fully vibration isolated from the case internally with AV mounts and flexible connection. All fan motors are for 400 volt 3 phase 50 Hz
  • High efficiency cross flow plate heat exchanger, with condensate drain pan, and fitted face and bypass damper with 230 volt actuator
  • Optional fitted controls, pre-wired to all internal components
  • Filter fitted to both supply and extract inlet, pleated, synthetic, grade G4.
  • Built in LPHW coil or EHB up to 9 steps of control
  • Units available plantroom or weatherproof, flat or stacked configuration
  • Internal units built using an aluminium tubular frame, and galvanised steel sheet panels with resin bonded mineral wool slab infill. External units supplied with sloping roof, channel base, inlet and exhaust cowls and powder coat finished in Signal Grey to RAL 7004
  • High efficiency filters, cooling and heat pump coils also available
  • Quick change plug connectors fitted to all electrical components for easy maintenance

Ecovent NRG 7, 8 and 9

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Ecovent NRGP 0, 1 and 2

This is a discontinued product, superseded by Ecovent EVX and Ecovent EAX

Ecovent NRG performance heat recovery air handling unit with energy efficient fans and high efficiency cross flow heat exchanger with fitted bypass damper.  Fitted and prewired isolator with dual fan speed controller for easy commissioning and demand ventilation options. Flat plant room case with bottom access to handing configuration B1. 

  • Low specific fan power to help meet Part L2A Building Regulations
  • Heat exchanger efficiency up to 70 %
  • High efficiency motors and backward curved impellers
  • Compact space saving construction with 15 mm doubled skinned case and Class O rated thermal and acoustic infill for the lowest noise breakout solutions
  • Unit supplied in one piece with pre-wired external isolator for easy installation
  • External access for fan speed adjustment to provide quick and simple commissioning
  • Fans and bypass damper fitted with quick change plug connectors for easy maintenance and service
  • G4 supply and extract filter fitted as standard
  • Fitted condensate drain pan
  • Self sealing 315 diameter circular spigot connections.
  • Air volumes up to 0.22 m³/s
  • The unit is supplied as standard with no top up heating or select the required electric heating option (sold separately)
  • Energy efficient control options are available for this unit to effectively control temperature and energy recovery and come complete with a simple remote touch screen
  • Maximise energy savings by combining an energy efficient control panel and air quality sensor for the ultimate demand ventilation solution

Ecovent NRGP 0, 1 and 2

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Ecovent Plus

This is a discontinued product, superseded by Ecovent EVX and Ecovent EAX

Heat recovery air handling unit

  • More models – duties from 0.05 to 2.0 m3/s
  • Fitted controls for maximum energy saving
  • Flat or stacked, plantroom or weatherproof
  • Tested to BS 848
  • There is no cross contamination of exhaust to supply air, and the plate heat exchanger needs no maintenance

Ecovent Plus

View Product Leaflet PDF

View O & M Instructions PDF

 
<< Back to top

FLO2

This is a discontinued product, superseded by Colourfan Twin Extract

Twin fan extract unit with run and standby direct drive centrifugal fans.
  • Plantroom options for internal use
  • Weatherproof options for external use with powder coat paint finish to light grey
  • Unit has 20 mm MEZ flange
  • Single skin case
  • Access both sides
  • Pre-wired AF500 auto changeover panel
  • Backdraught shutters

FLO2

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Limpet

Limpet 170, 240 and 300

These are discontinued products.

Ceiling mounted extract fan with air inlet grille on underside and direct drive centrifugal fan.

  • Optional grilles priced separately
  • Discharge spigot 98 mm diameter
  • Backdraught flap
  • Bottom access

Limpet

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

MYFLO

This is a discontinued product, superseded by the Colourfan range.


Duct mounted MYFLO for internal use with direct drive mixed flow fan
  • Unit has 20 mm MEZ flanges
  • Single skin galvanised case
  • Side access
  • External rotor motor
  • Suitable for hot humid air (40 °C)

MYFLO

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

REX

This is a discontinued product, superseded by Colourfan Extract

REX unit for internal use with direct drive centrifugal fan

  • Unit has 20 mm MEZ flanges
  • Optional G3 panel filter (priced separately)
  • Single skin galvanised case
  • Left or right access
  • Lift off access doors

REX

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

SAM

This is a discontinued product, superseded by Colourfan Supply

SAM supply unit for internal use with G3 panel filter and direct drive centrifugal fan

  • Electric heater and hot water heater battery options with or without inlet damper
  • Unit has 20 mm MEZ flanges
  • Single skin galvanised case
  • Left or right access
  • Lift off access doors

SAM

View Product Leaflet PDF

View O & M Instructions PDF

 
<< Back to top

Sensaire

This is a discontinued product, superseded by Colourfan Supply and Colourfan Extract

Sensaire low energy units with intelligent controls. Duty range 0.2 to 1.8 m3/s with pressures to 500 Pa

  • Fitted intelligent controls
  • Easy to use touch screen remote controller
  • Demand ventilation via air quality sensor
  • Low energy fans, with low SFP
  • 5 sizes with duty range 0.2 to 1.7m3/s
  • Filter grades from G4 to F8
  • Hot water or electric heating
  • Cooling coils with matching condensers
  • Fitted silencers
  • Unique construction for easy installation
  • Dampers and mixing boxes
  • All units speed controllable

Sensaire

View Product Leaflet PDF

 
<< Back to top

Skyline

This is a discontinued product, superseded by Skypod

Low silhouette roof extract units

Features

  • Curb mounting or profiled roof bases
  • Powerful performance
  • Low noise level units
  • Easy to install

View Product Leaflet PDF

 
<< Back to top

Tex Twin Fans

This is a discontinued product, superseded by Colourfan Twin

Direct Drive, Belt Drive, Plantroom and Weatherproof.

Features

  • Wide duty range from 0.05 m3/s to 2.2 m3/s
  • Prewired terminal box fitted adjacent to inlet spigot on plantroom units
  • Easy maintenance - each fan on slide out plate
  • Optional single or double skinned case
  • Bolt-on silencers available from stock
  • Range of autochangeover panels
  • Easy duct connection using proprietory flange systems

View Product Leaflet PDF

 
<< Back to top

T-Line 90

This is a discontinued product, superseded by T-Line 120

Ideal for polluted air extract, including kitchen hood, commercial and industrial processes. Internal extract unit with energy efficient direct drive backward curved impeller.

  • This range is suitable for up to 90 °C constant operating temperatures
  • Access both sides
  • Pre-wired isolator complete with quick change plug connections for easy maintenance
  • Galvanised steel construction
  • 30 mm MEZ flange connection
  • Pressure tapping point for quick commissioning
  • Suitable for both horizontal and vertical mounting
  • Motor out of airstream
  • Lifting eyes to aid installation and service
  • Easy to clean and maintain

T-Line 90

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Twinimum

This is a discontinued product, superseded by Colourfan Twin Extract

Twin fan extract unit for internal use with run and standby direct drive centrifugal fans

  • 147 mm circular spigots
  • Optional auto changeover panel (priced separately)
  • Acoustically lined case
  • Top or bottom access
  • Mounting feet and AV mounts supplied
  • Backdraught shutters

Twinimum

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Vecon

This is a discontinued product.

DX condensing units for both cooling and heat pump applications.

Features

  • Cooling only and heat pump options
  • R407C refrigerant
  • Hermatic scroll compressors in all models
  • Filter dryer
  • HP/LP switch protection
  • All units: 1 refrigerant circuit, 1 compressor, 1 fan
  • Galvanised steel case with powder coat paint finish, colour beige
  • BS, CE and PED compliant

View Product Leaflet PDF

 
<< Back to top

Weathermaster Extract

This is a discontinued product, superseded by Colourfan Extract

Weathermaster extract unit for external use with direct drive centrifugal fan and outlet cowl with bird guard.

  • Unit has 20 mm MEZ flange
  • External powder coat paint finish to light grey
  • Single skin case
  • Removable weather lid for access

Weathermaster Extract

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Weathermaster Supply

This is a discontinued product, superseded by Colourfan Supply

Weathermaster supply unit for external use with inlet cowl and bird guard, G3 panel filter and direct drive centrifugal fan.

  • Electric heater and hot water heating coil options
  • External powder coat paint finish to light grey
  • Single skin case
  • Removable weather lid for access

Weathermaster Supply

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

Workhorse

This is a discontinued product.

Heavy duty centrifugal extract fans

  • Duty range up to 10 m3/s
  • Operating temperature up to 150 oC with motor out of airstream
  • Flat pack option for restricted access

Workhorse

View Product Leaflet PDF

View O & M Instructions PDF

View Product Specification PDF

 
<< Back to top

<< Back to Product Categories

Welcome to VES Ventilation

VES manufactures a wide range of commercial heat recovery ventilation products for public, commercial and industrial buildings in the UK. One of the great strengths of VES is its ability to design and build non-standard ventilation products and systems to suit customers' requirements, in a reasonable timescale and at a competitive price. VES also ensures that it reinvests profits into a substantial research and ventilation development programme.


+ Product Categories

+ Specialist Site Services

Offering a range of on-site services, VES Specialist Site Services are your 'Ventilation Doctors'. From solving noise problems to repair and refurbishment, the VES approach delivers cost-effective solutions. Tight spaces and access are overcome with carefully engineered flat packed units. Business downtime is minimised and often remains unaffected. Energy savings are found that go beyond customer expectations. Equipment life expectancy is increased.
Read more...

+ Careers at VES

As a growing and successful business VES recruits new team members across a wide range of roles. These include Site Engineers, Sales Engineers and Project Administrators to name but a few. We offer competitive salaries and benefits along with excellent career opportunities. Current vacancies can be viewed on our Careers page, whilst we also welcome speculative enquiries. No agencies please.
Learn more...

+ VES Direct


Many VES customers are finding VES Direct the convenient and fast way to get their favourite VES products. Direct from the factory prices, amazing offers, rapid nationwide delivery and valuable rewards make this one of the best ways to get your hands on a deal.
Buy now at VES Direct

VES Direct

Market Sectors

We work across various key sectors and project types:

  • Education
  • Retail
  • Industrial
  • Catering
  • Healthcare
  • Residential
  • Pharmaceutical