Product Ranges -

Airline supply unit for internal use with G3 panel filter and direct drive centrifugal fan.

• Electric and hot water heater options.
• 147mm circular spigots.
• Acoustically lined case.
• Top or bottom access.
• Mounting feet and AV mounts supplied.

Low duty, high efficiency plate heat exchanger unit.

• Duty 0-5m³/sec.
• Cased plate heat exchangers.
• 50-65% heat recovery depending on conditions.
• Case manufactured from galvanised sheet steel with thermal lining.
• Condensate drain pan to exhaust with 3/4" BSP connection.
• Round spigots complete with 'safe fit' rubber gasket for easy ductwork connection.
• Units can be hung or secured to a base.
• Easy to install in ventilation systems.
• Can be used in conjunction with many VES products.

High duty, high efficiency plate heat exchanger unit.

• Duty 0-2.0m³/sec.
• Cased plate heat exchanger.
• 50-60% heat recovery depending on conditions.
• Case manufactured from galvanised sheet steel with thermal lining.
• Rectangular spigots with 20mm mez flange connections.
• Easy to install in ventilation systems.
• Can be used in conjunction with many VES products.

• 0 range has air volume up to 0.125m³/sec.
• 1 & 2 range has air volume up to 0.325m³/sec.
• Shallow design for ceiling void or roof space.
• High efficiency cross flow heat exchanger.
• Top or bottom access.
• Fitted fan control and isolator.
• Circular spigot connections.
• 1 & 2 range has bypass damper to heat exchanger, optional fitted controls package and weatherproof construction available.

• 25mm double skinned cases, available plantroom or weatherproof, flat or stacked configuration. All units built with an aluminium tubular frame, and galvanised steel sheet panels, with resin bonded mineral wool slab infill.
• External units supplied with sloping roof, channel base, inlet and exhaust cowls and powder coat finished in Signal Grey to RAL 7004.
• Low energy backward curved single inlet fans, with low SFP, available with 230volt single and 400volt three phase motors.
• Cross flow plate heat exchanger with fitted face and bypass damper and 230volt actuator.
• Optional fitted controls, prewired to all internal components.
• Built in LPHW coil or EHB.
• Fans and bypass damper motor fitted with quick change plug connectors for easy maintenance.
• Flat units have top or bottom access.
• Stacked units have side access.
• Units supplied in two sections.

• 50mm double skinned case certified to EN 1886 standard.
• Direct drive centrifugal plug fans complete with prewired inverter for energy saving, and rapid site commissioning. The fan is fully vibration isolated from the case internally with A.V. mounts and flexible connection. All fan motors are for 400 volt 3 phase 50 Hz.
• High efficiency cross flow plate heat exchanger, with condensate drain pan, and fitted face and bypass damper with 230 volt actuator.
• Optional fitted controls, prewired to all internal components.
• Filter fitted to both supply and extract inlet, pleated, synthetic, grade G4.
• Built in LPHW coil or EHB up to 9 steps of control.
• Units available plantroom or weatherproof, flat or stacked configuration. Internal units built using an aluminium tubular frame, and galvanised steel sheet panels with resin bonded mineral wool slab infill. External units supplied with sloping roof, channel base, inlet and exhaust cowls and powder coat finished in Signal Grey to RAL 7004.
• High efficiency filters, cooling and heat pump coils also available.
• Quick change plug connectors fitted to all electrical components for easy maintenance.

Ecovent NRG performance heat recovery air handling unit with energy efficient fans and high efficiency cross flow heat exchanger with fitted bypass damper.  Fitted and prewired isolator with dual fan speed controller for easy commissioning and demand ventilation options. Flat plant room case with bottom access to handing configuration B1. 

• Low specific fan power to help meet Part L2A Building Regulations.
• Heat exchanger efficiency up to 70%.
• High efficiency motors and backward curved impellers.
• Compact space saving construction with 15mm doubled skinned case and Class O rated thermal & acoustic infill for the lowest noise breakout solutions.
• Unit supplied in one piece with pre-wired external isolator for easy installation.
• External access for fan speed adjustment to provide quick and simple commissioning.
• Fans and bypass damper fitted with quick change plug connectors for easy maintenance and service.
• G4 supply and extract filter fitted as standard.
• Fitted condensate drain pan.
• Self sealing 315 diameter circular spigot connections.
• Air volumes up to 0.22m³/s.
• The unit is supplied as standard with no top up heating or select the required electric heating option (sold separately).
• Energy efficient control options are available for this unit to effectively control temperature and energy recovery and come complete with a simple remote touch screen.
• Maximise energy savings by combining an energy efficient control panel and air quality sensor for the ultimate demand ventilation solution.

• More models – duties from 0.05 to 2.0 m³/sec.
• Fitted controls for maximum energy saving.
• Flat or stacked, plantroom or weatherproof.
• Tested to BS 848.
• There is no cross contamination of exhaust to supply air, and the plate heat exchanger needs no maintenance.

Belt drive air handling units with 25mm thick double skinned cases.

Numerous features including:

• Duty range 0.4 to 12.0 m³/sec.
• High quality plantroom or weatherproof units.
• Inlet damper.
• Mixing box.
• Frost coil.
• All types of filter.
• Plate heat exchanger, heat wheel and run around coils.
• Cooling coil, chilled water or DX.
• Heaters, all types.
• Belt drive or High performance centrifugal fans without scrolls.
• EFF2 (IE1) or high efficiency EFF1 (IE2) motors available.
• Gas heater, indirect gas fired.
• Humidifier.
• Silencer, fitted or remote.
• Very low noise units. 
• Flat pack installation service throughout UK. 

Belt drive air handling units with 50mm thick double skinned cases.

Numerous features including:

• Duty range 0.4 to 20.0 m3/sec.
• High quality plantroom or weatherproof units.
• Inlet damper.
• Mixing box.
• Frost coil.
• All types of filter.
• Plate heat exchanger, heat wheel and run around coils.
• Cooling coil, chilled water or DX.
• Heaters, all types.
• Belt drive or High performance centrifugal fans without scrolls.
• EFF2 (IE1) or high efficiency EFF1 (IE2) motors available.
• Gas heater, indirect gas fired.
• Humidifier.
• Silencer, fitted or remote.
• Very low noise units.
• Designed to meet BSEN 1886.
• Flat pack installation service throughout UK.

SAM supply unit for internal use with G3 panel filter and direct drive centrifugal fan.

• Electric heater and hot water heater battery options with or without inlet damper.
• Unit has 20mm MEZ flanges.
• Single skin galvanised case.
• Left or right access.
• Lift off access doors.

Sensaire low energy units with intelligent controls. Duty range 0.2 to 1.8 m³/sec with pressures to 500Pa.

• Fitted intelligent controls.
• Easy to use touch screen remote controller.
• Demand ventilation via air quality sensor. 
• Low energy fans, with low SFP.
• 5 sizes with duty range 0.2 to 1.7m³/sec.
• Filter grades from G4 to F8.
• Hot water or electric heating.
• Cooling coils with matching condensers.
• Fitted silencers.
• Unique construction for easy installation.
• Dampers and mixing boxes.
• All units speed controllable.

• Electric heater and hot water heateing coil options.
• External powder coat paint finish to light grey.
• Single skin case.
• Removable weather lid for access.